Simple discussion on “Deep hole processing”
Holes are important surfaces on boxes, brackets, sleeves, rings, and plate parts, and are often encountered in machining. If the m...
What is the reason for chattering in the machining process?
The problem of vibration during CNC machining causes chatter on the surface of the workpiece. It also causes the rework rate and s...
How extrusion and die-casting can be applied in heat sink production?
In the previous article, we have introduced the differences between aluminum extrusion and die casting. Now we start to talk about...
What are the differences between aluminum extrusion and die casting?
Let's take a look at the difference between aluminum extrusion and die casting: The appearance The extruded aluminum profile is a ...
How to use EDM in manufacturing industries?
What is EDM? EDM is an acronym. It stands for electric discharge machining. In the dielectric fluid for insulation, the distance b...
What are up-milling and down-milling?
Milling is one of the most common types of machining methods. For roughing or finishing parts of different structures, it is mostl...
What is the feed rate in CNC machining?
The feed rate is programmed in the setting of the CNC model to control the cutting speed of the tool to the workpiece. The tool ro...
What is the taper turning process by lathe?
To make the inner and outer taper with the same taper angle for fitting, the friction resistance is combined with the two parts, a...
What are the factors that might cause warping issues in CNC machining?
The workpiece deformation in machining is a difficult problem to solve. Analyzing the cause of the deformation is necessary before...
5 factors make the cost of CNC machining parts different
The price of CNC machined parts depends on the following: 1. Machining time: The longer it takes to machine a part, the more expen...